Elevate QuickSeam FormFlash - 229mm wide x 15.24m Roll - W56RAC1650

Stock Availability:
42
SKU:
W56RAC1650
$1,288.09

Very flexible uncured FormFlash, factory laminated to QuickSeam Splice Tape. Designed to flash onto EPDM geomembrane as specified in Elevate specifications.

This flexible FormFlash product system is also perfect for sealing the inside of leaking letterboxes built within stone and brick fences or pillars. Wet mail from leaks through cracks will be a thing of the past.

Please watch the Instructional Videos below.     Also sold as per metre as one length cut from the roll.

Elevate QuickSeam FormFlash - 229mm wide x 15.2m Roll

Also sold as priced per metre as one continuous length cut from the roll.

Characteristics

View the following Elevate detail videos for QuickSeam FormFlash applications


Making an inside corner with Elevate QuickSeam FormFlash


Making an outside corner with QuickSeam FormFlash


Installation of a Elevate QuickSeam FormFlash patch at a T joint of QuickSeam Splice Tape. Note there must be at least 75mm coverage from the potential leak spot


How to flash a simple pipe penetration using Elevate QuickSeam FormFlash and LapSealant HS

For technical graphical details of this process, please refer to Sections 2.3.3 Page 22 of System Installation in the Elevate Installation Guidelines

This pipe flashing process requires Full Stainless Steel Hose Clamps - Click the link to our range
(Please note for large diameters, these hose clamps are piggy-backed together. e.g: 2 x GSS48 clamp suits 150mm diameter pipe)


How to repair a wrinkle in a seam with Elevate QuickSeam FormFlash and LapSealant HS

Elevate QuickSeam FormFlash - 229mm wide x 15.2m Roll

Also sold as priced per metre as one continuous length cut from the roll.

Characteristics

pdf
(Size: 234.1 KB)
Write Your Own Review
You're reviewing:Elevate QuickSeam FormFlash - 229mm wide x 15.24m Roll - W56RAC1650
Your Rating