Elevate EasySealant - 290ml cartridge

Stock Availability:
11
SKU:
FIRE100
$39.27

The Elevate EasySealant is a superior quality sealant-adhesive based on MS polymer.

It is designed to seal, adhere and repair elevate PondGard, PondEasy & Geogard EPDM membranes. EasySealant will ensure a strong and durable watertight connection to different types of substrates (EPDM to EPDM, wood, metal, concrete, stones, etc.).

Please Note: Elevate EasySealant is basically intended for repairs, underwater patching and short runs of splicing. It is not intended for full scale panel splicing or as a replacement of the traditional elevate seaming & detailing process using QuickSeam Primer Plus, Splice Tape & FormFlash.

You will need a Seam Roller Tool to correctly apply pressure to adhere this elevate EasySealant

The Elevate EasySealant is a superior quality sealant-adhesive based on MS polymer.

It is designed to seal, adhere and repair elevate PondGard, elevate PondEasy,  elevate Geogard & elevate GeoSmart  EPDM membranes. EasySealant will ensure a strong and durable watertight connection to different types of substrates (EPDM to EPDM, wood, metal, concrete, stones, etc.).

Please Note: Elevate EasySealant is basically intended for repairs, underwater patching and short runs of splicing. It is not intended for full scale panel splicing or as a replacement of the traditional elevate seaming & detailing process using QuickSeam Primer Plus, Splice Tape & FormFlash.

You will need a Seam Roller Tool to correctly apply pressure to adhere this elevate EasySealant.

Advantages:

  • Strong watertight adhesion
  • Bonds and seals all kind of materials
  • Easy and fast installation (no primer)
  • Fast curing time
  • Indoor and outdoor use (UV resistant)
  • Can be used underwater
  • Durable, elastic and flexible
  • Mold resistant
  • Odourless
  • Wide range of temperature resistance
  • Free of solvents, toluene, phthalates
  • No transportation restrictions

General Considerations:

  • Coverage: +/- 6 lm per cartridge with a 6 mm bead width. (For a seam, 2x beads 50mm apart gives 3m of seaming)
  • Store cartridge at 10°C-25°C. Protect from direct sunlight.
  • Use only when temperatures are between 5°C and 35°C.
  • Connection surfaces must be smooth, clean and free from dust and grease.
  • The sealant color will become slightly lighter in contact with water. For aesthetic reasons, it is therefore recommended to limit the exposed surfaces of sealant and to clean the sealant stains.
Write Your Own Review
You're reviewing:Elevate EasySealant - 290ml cartridge
Your Rating