Elevate Lap Sealant HS - 325ml cartridge W56-358-703E

Stock Availability:
59
SKU:
W56358703ES
$43.25

Designed to give additional sealing and mechanical protection to the exposed edges of Elevate QuickSeam FormFlash & the finishing edge of Termination Bars.

See Technical Information Category for details.

Designed to give additional sealing and mechanical protection to the exposed edges of Elevate QuickSeam FormFlash, after minimum 4hrs from time of FormFlash installation & preferably before the end of the working day to reduce the chance of contamination.

Also used to cover the exposed edge after Elevate PondGard  EPDM has been adhered to a concrete substrate with Elevate Bond Adhesive, Elevate Water Block Seal(S-20) and mechanically fastened Elevate Termination Bar or similar which has been screwed along the edge.

Coverage: 7 lin. m. per cartridge. Thinning is not allowed.

Characteristics:

  • Excellent resistance to ozone, UV & general weathering
  • Excellent resistance to heat, cold & water
  • Good adhesion to Elevate EPDM Geomembrane sheet, metals, wood & concrete
  • Good slump resistance

For more information refer to the Technical Information Sheet (TIS) in Elevate Lining Systems - Installation Guidelines.

Back to our Elevate EPDM Rubber Pond & Dam Liner main page.

pdf
(Size: 175.9 KB)
Technical Information Sheet
Write Your Own Review
You're reviewing:Elevate Lap Sealant HS - 325ml cartridge W56-358-703E
Your Rating