Geotextile Black Underlay Propex AS 801 (272gsm) 4m width - enter your length
A high quality lightweight (272g/m2) polypropylene underlay fabric. High abrasion & puncture resistance.
Purchase in a continuous length, cut-off-the-roll, down to 0.1m increments. Also sold as discounted roll quantities.
MAXIMUM CUT LENGTH IS 20 METERS. PLEASE CONTACT US IF YOU NEED CUT LENGTH 20 METERS & OVER , FOR A SHIPPING QUOTE
See our full range of Propex Geotextile Underlays in full 200m and 115m rolls or cut-to-length quantities
Propex AS-501 Nonwoven Geotextile Underlay Fabric - 2.0m wide x 200m roll. Full roll (400m2)
Also available as cut-off-the-roll quantities
Features & information:
- We suggest that for pond liner applications that this Propex AS501 grade is used as an underlay to give a clean worksite & some protection, but mostly to prevent the contamination by dust & sand of seaming & detailing processes. It is not meant for protection against hard sharp aggregate. In that case use Propex grade AS 801.
- Grab tensile strength: 780N
- Mass: 170g/m2
- Product Conformance to Strength Specification: Class B
- Good abrasion resistance.
- Will continue to cushion & protect Elevate (formerly Firestone) EPDM geomembrane pond liner for years.
In most pond applications underlay is not necessary. Simply avoid the exposure of sharp hard objects & cover stony aggregate with sand or old carpet.
Specifications: Propex Geotextile Underlay is made from virgin polypropylene staple fibres, non woven, needled punched - See Data Sheet PDF downloads below.
Please Note.
- This product complies with Australian & New Zealand Highway Specifications. RMS(NSW) - R63, DTMR(QLD) - MRTS27, NZTA - F/7
- Manufactured in accordance with international quality standard DS/EN ISO 9001
