Hozelock Sensor Controller Tap Timer - 2212
Supplying 75% of the garden watering market in Great Britain
A tap mounted watering controller that automatically waters every day at sunrise and sunset, the best time to water your garden.
It also has a "timed 60min water-now" manual overide.
Suitable for low water pressure such as non-pumped 1m head tank water to high 1000kPa town pressure.
Supplying 75% of the garden watering market in Great Britain
Hozelock 2212 Sensor Controller Tap Timer
A tap mounted watering controller that automatically waters every day at sunrise and sunset, the best time to water your garden
Key Benefits Include:
- Will work directly connected to a rainwater tank, with at least 1m depth of water in the tank (1m head pressure)
- Easy to set up
- Day light sensor automatically adjusts daily watering schedule to coincide with changing time of sunrise and sunset
- Manual water now button for 60 minutes of watering at any time
The majority of gardeners prefer to water at sunrise or sunset. It’s the best time to minimise water evaporation and leaf scorch, but it is not always convenient to do it yourself at these times of the day.
Day Light Sensor The Hozelock Sensor Controller takes care of this for you as it includes a day light sensor that automatically adjusts your watering schedule to start at sunrise and sunset, every day.
No need to programme ever again, it will automatically change the start times to coincide with sunrise and sunset as the seasons change.
Watering Schedule You can select from 2, 5, 10, 20, 30 or 60 minutes and is easy to adjust in case you need to react to changing weather conditions, without ever having to refer back to the instruction book.
Water Now If you need to dispense water outside of the automatic schedule you can use the Water Now button to turn on the water. Press once and the unit can be turned on for a 60 minute duration or simply press again to cancel the operation for shorter periods.
Battery Status Simply press the button to check the status of the batteries. The LED light will illuminate to indicate the strength of the remaining battery life.
If the unit is not working correctly, please check for low battery power by holding the button in. The single light will indicate the following:
- Green light on: Functional battery power available. If the batteries are tending towards low, then the timer will probably only work in manual mode but the light sensor will not open the valve.
- Red light: Replace batteries. Average battery life is maximum 8 months, used twice a day.
Failure Prevention Mode A built in safety feature detects when the battery levels have dropped to a level that could fail whilst a watering schedule is in progress. The LED indicator lights will flash red when the batteries need to be replaced.
Easy to Install The Sensor Controller is easy to set up. Simply insert 2 x AA batteries (not supplied) and then select the required watering pattern from the dial. No complex programming skills required. It is supplied with a choice of 21mm (1/2” BSP), 26.5mm (¾” BSP) or 33.3mm (1” BSP) adaptors for connection to most garden taps.
Versatile Usage The Sensor Controller is a versatile unit that can be used with Garden Sprinklers up to 10 Bar water pressure (1000kPa or 140PSI)), and for low pressure micro irrigation watering with 1.5 Bar (150kPa), or Water Butts or tanks with very low 1m head pressure of 0.1 Bar (10kPa), due to the unique ball valve component.
Warranty: 2-year guarantee against faulty manufacture
