Elevate Lap Sealant HS - 325ml cartridge W56-358-703E

Designed to give additional sealing and mechanical protection to the exposed edges of Elevate QuickSeam FormFlash, after minimum 4hrs from time of FormFlash installation & preferably before the end of the working day to reduce the chance of contamination.

Also used to cover the exposed edge after Elevate PondGard  EPDM has been adhered to a concrete substrate with Elevate Bond Adhesive, Elevate Water Block Seal(S-20) and mechanically fastened Elevate Termination Bar or similar which has been screwed along the edge.

Coverage: 7 lin. m. per cartridge. Thinning is not allowed.

Characteristics:

• Excellent resistance to ozone, UV & general weathering
• Excellent resistance to heat, cold & water
• Good adhesion to Elevate EPDM Geomembrane sheet, metals, wood & concrete
• Good slump resistance

For more information refer to the Technical Information Sheet (TIS) in Elevate Lining Systems - Installation Guidelines.

Back to our Elevate EPDM Rubber Pond & Dam Liner main page.