Elevate Quickseam FormFlash - 229mm wide - enter your length - W56RAC1650C
Stock Availability:
88.7
SKU:
W56RAC1650C
$97.97
Elevate QuickSeam FormFlash 229mm wide- sold here priced per metre, cut from the roll.
Very flexible uncured Elevate FormFlash, factory laminated to QuickSeam Tape. Designed to flash onto EPDM geomembrane as specified in Elevate Installation Guidelines.
This flexible Elevate FormFlash product system is also perfect for sealing the inside of leaking letterboxes built within stone and brick fences or pillars. Wet mail from leaks through cracks will be a thing of the past.
Please watch the Instructional Videos below. Also sold as a 15.25m roll.
Elevate QuickSeam FormFlash 229mm wide- sold here priced per metre, cut from the roll.
Also sold as a 15.25m roll.
Characteristics
- Elevate QuickSeam FormFlash consists of extremely flexible 229mm wide uncured FormFlash, factory laminated to QuickSeam Tape.
- It has no memory & so will hold in place without distorting the surrounding EPDM.
- Designed to flash onto EPDM geomembrane inside & around corners, pipes & penetrations as specified in Elevate specifications.
- For correct application of this tape you must prepare the mating raw EPDM surfaces with QuickPrime Plus EPDM Seam Primer. No other primer liquid is permitted.
Applied with a Elevate QuickScrubber Tool Set or for small patching preparation a clean Scotchbright type plastic scouring pad is sufficient.
Apply pressure with a Elevate Seam Roller Tool or for small one-off jobs of patching or flashing, the Budget Roller Tool is sufficient.
Press to form the Formflash into corners with the Convex Round Edge Steel Roller.
Finish around the perimeter with Elevate LapSealant HS.
Write Your Own Review